File:
flaperon.txt

Description:
Aileron and flap channels are mixed to create flaperons. 
There is a 20% overlap of aileron control when flaps are 
fully deployed.

Setup:
Connect the SM2 channel 1 input to the receiver flap 
channel. Connect the SM2 channel 2 input to the receiver
aileron channel. Connect two servos to the SM2 servo 
outputs, one for each control surface. Servo reversing
might be required to obtain proper control surface 
direction.


Desert RC Standard Mixer Control Panel Version V1.0
SCALE_NEUTRAL                           UNCHECKED
CH1_REVERSE_INPUT                       UNCHECKED
CH2_REVERSE_INPUT                       UNCHECKED
CH1_REVERSE_OUTPUT                      UNCHECKED
CH2_REVERSE_OUTPUT                      UNCHECKED
CH1_TO_CH2_GAIN                         UNCHECKED
CH2_TO_CH1_GAIN                         CHECKED
CH1_SERVO_RATE_MAX_CHANGE               0.00043000 Seconds
CH2_SERVO_RATE_MAX_CHANGE               0.00043000 Seconds
MINUMUM_INPUT_PW                        0.00107000 Seconds
MAXIMUM_INPUT_PW                        0.00193000 Seconds
CH1_NEUTRAL_OFFSET_PW                   -0.00016769 Seconds
CH2_NEUTRAL_OFFSET_PW                   0.00016769 Seconds
CH1_LOW_ENDPOINT_PW                     0.00107000 Seconds
CH2_LOW_ENDPOINT_PW                     0.00107000 Seconds
CH1_HIGH_ENDPOINT_PW                    0.00193000 Seconds
CH2_HIGH_ENDPOINT_PW                    0.00193000 Seconds
CH1_DEFAULT_POSITION_PW                 0.00150000 Seconds
CH2_DEFAULT_POSITION_PW                 0.00150000 Seconds
CH1_OUTPUT_FREQ                         49Hz
CH2_OUTPUT_FREQ                         49Hz
MIX_SECONDARY_1TO2                      100%
MIX_PRIMARY_1TO2                        40%
MIX_SECONDARY_2TO1                      -40%
MIX_PRIMARY_2TO1                        100%
SELECT_GAIN_MIXING_MODE                 0