 |
 |
|
|
||
|
Fly Sky Format
|
|
Fly Sky Format: Fly Sky receivers need to receive the transmitter binding codes over the serial cable each time they are turned on or they will not sync up with the transmitter, and they will not send any data. Once thay are synchronized with the transmitter, they will begin sending data representing all of the transmitter stick and switch postions in a non-standard, 16-bit asynchronous format. All data is sent at approximately 41.67K-baud. The bit protocol consists of a single start bit, 16 data bits, LSB first, and several stop bits. A total of seven 16-bit words are sent. The first 6 words represent transmitter stick and switch position information and the last word is a simple checksum.
|
 |
Technical Questions: info@desertrc.com Billing Questions: billing@desertrc.com |
|
Copyright 2000 - 2009 Desert RC. All rights reserved. Legal notices |
1505 West St. Mary's Rd. #145 Tucson, AZ 85745 Skype us at "desertrc" Phone: (520) 284-0601 |
